Product introduction: Fiberglass bitumen tiles Auxiliary products for the installation of bitumen tiles made of fiberglass requires a number of accessories. Among them, nails of the desired length and with a wide hat, which are usually used to fasten the tiles. The sealing requires bitumen ...
Product Introduction:Fiberglass bitumen tiles auxiliary products
For the installation of bitumen tiles made of fiberglass requires a number of accessories. Among them, nails of the desired length and with a wide hat, which are usually used to fasten the tiles. For sealing, bitumen glue is required, which is used to fill the cracks between the tiles and intersect with protruding objects. If the roofing base is not waterproof or uneven, waterproofing membranes and materials for repairing the base (for example, cement and solution) may be required to ensure the installation and overall productivity of the roof.
Waterproofing rolled roofing material: a bilateral self -adhesive waterproofing rolled roofing material is first laid on the roof, creating a waterproofing effect in the form of a safety policy, effectively preventing problems such as collapse and emptying, and then bituminous roofing material is mounted on the upper surface for a better achievement of the impact and moisture insulation effect.
Horse:For installation, a separately cut horseback is used, which is not only aesthetically pleasant to others, but also provides additional protection against sucking water.
Carnetic bar:One layer of the filtrate is designed so that it is smooth, and the cornices are installed so that the first layer of the filtrate does not touch directly with the roof.
Starting bar:They are installed on the edges of the roof, cornices, the tops of the subsidiaries, etc. To prevent the penetration of rainwater into the internal structure of the building, when it flows along the edges of the roof or walls.
Steel nails:For the frame of the bitumen roof, special nails are used, usually 2.5 cm nails for concrete roof frames, 2.0 cm nails for the structural roof frames, and at least four nails are used to fasten the entire roof.
Bitumen glue:Bitumen glue has a waterproof effect and is usually used for a point coating of the gaps, such as the upper layers of the tiles, corners, wall angles, cornices and edges.
Product introduction: fiberglass bitumen tile type Tile size: (1000 ± 3.2) mm*(320 ± 3.2) mm*2.6mm packaging: 21 pcs/pack. Weight of packaging: 21.5 ± 1 kg/pack.
Product Introduction: Color Metal Science Rainbow Type Size: 1340mm*420mm Open area: 1290mm*370mm weight: 2.6-2.8 kg sheet/square: 2.1 sheets
Product introduction: fiberglass bitumen tiles geometric type Size tile: （1000 ± 3.2） mm*(320 ± 3.2） mm*2.6mm packaging: 21 pcs/pack. Packaging weight: 21.5 ± 1 kg/pack.
Product Introduction: Inorganic aligning putty powder technical characteristics: 2 ...
Product introduction: fiberglass bitumen tiles corrugated type of tile: (1000 ± 3.2) mm*(320 ± 3.2) mm*2.6mm packaging: 21 pcs/pack. Weight of packaging: 21.5 ± 1 kg/pack.
Product introduction: fiberglass bitumen tile Composite Type Tile size: (1000 ± 3.2) mm*(333 ± 3.2) mm*2.6mm packaging: 21 pcs/pack. Weight of packaging: 28 ± 1 kg/pack.
Ceramic colored sand uses mature foreign production technology, chooses natural ...
Features of the product: 1. The strong covering capacity 3 is applied to putty or cement base 2. The level of fire protection A1 5 is not discolored for a long time. Lack of excretion of formaldehyde
Product introduction: fiberglass bitumen tiles simple tile size: (1000 ± 3.2) mm*(333 ± 3.2) mm*2.6mm packaging: 21 pcs/pack. Weight of packaging: 28 ± 1 kg/pack.
Solutions for concrete roof made of fiberglass bitumen tiles fiberglass bitumen roofs ...
Product Introduction: Color Metal Science Square Type Size: 1340mm*420mm Open area: 1290mm*370mm weight: 2.6-2.8 kg sheet/square: 2.1 sheets
Product introduction: crack -resistant solution Technical characteristics: 20 kg/bag made and ...
Product characteristics: 1. Added ions that interfere with fussing 2. The level of protection against fussing I 3. The surface of the high hardness, resistant to powder formation 4. Strong alkaline formula, high resistance to atmospheric influences 5. High adhesion and strong adhesion 6. The level of fire protection A1
Product characteristics: 1. PH value is about 13, which effectively kills microorganisms. 2. After the polymerization reaction is completed, it can be soaked in water for a long time. 3. The structure of curing is different: it does not foam, does not crumble and does not crumble. 4. The level of fire protection A1 5. Microphoric structure regulates the moisture of the walls depending on the environment.
① The outline of insulating sand: insulating reflecting color sand is a new material with Vost ...
Solutions for a roof from colored stone metal tiles, colored stone metal, has a smaller ...
